(1) The dishwasher motors cannot start running First ch […]
(1) The dishwasher motors cannot start running
First check if the power supply is properly energized and then check if the fuse is blown or there is a problem with the circuit breaker. If so, you will need to replace the fuse or reset the circuit breaker. If there is no problem with these, it is very likely that the motor pump will be blocked. If the dishwasher is not used for a long time, the motor may become stuck. The power of the opening may not turn it, it will only ring, it must be moved. Only then can I turn up normally. Disassemble the chassis and find the motor pump. Use a hand or screwdriver to turn the motor pump impeller and turn it back to normal operation.
(2) The dishes in the dishwasher are not cleaned.
First of all, check the basic question, whether the tableware is overloaded, is it loaded with reference to the manual? Has the knife and fork chopsticks dropped under the bowl basket, blocking the rotation of the spray arm?Is it correct to put the dishwashing supplies? Is it the food residue on the tableware that blocks the water inlet? At this time, it is necessary to check the devices in the dishwasher one by one. Check the spray arm, filter screen, inlet valve for blockages, and clean it in time to see if the water and water pressure in the dishwasher are insufficient. Insufficient water pressure can run the dishwasher when other household equipment uses less water.
(3) White film in the dishwasher
Minerals in hard water are the culprit of dishwasher failure. The minerals in the hard water not only can block the normal operation of the water inlet and outlet pipes, but also easily cause damage to the dishwasher. In this case, the dishwasher and the body cleaner are used to clean the inside and outside of the dishwasher.